RotaCut Tool

The RotaCut Tool is specifically developed for cutting textiles, canvas, mesh and other air transparent materials. Since most textiles are more or less air transparent the vacuum hold-down system of the table will not be effective when cutting such materials. The RotaCut Tool has been designed with this in mind.

It operates by rotating a 10-facetted knife blade at 10,000 RPM. The blade protrudes from a slot in a hold-down foot that presses down on the material. The foot is made from a material that reduces friction to a minimum, and these properties, in connection with the fibrous surface of the conveyor belt, or felt mats; provide a hold-down sufficient for cutting most textile materials.

Rigid Material Knife Tool

The Rigid Material (RM) Knife Tool is a static knife tool suitable for a wide range of materials at high speed. There is a large selection of knife blades available that makes it possible to cut everything from light weight detailed work to heavy rigid board like plastic foamed PVC 3 mm.

KissCutting Knife Tool

The KissCutting Knife Tool is a specialty tool for kiss cutting adhesive vinyl (decals) and foils. It’s used for applications where it is important to keep the backing intact and only cut through the top film.

Due to the characteristics of the material, a spring loaded pressure is required in order to achieve perfect peal/weed quality. The pressure is manually set with a scale indicated turn key.

The Psaligraphy Knife Tool

The Psaligraphy Knife Tool is specifically developed for cutting fine details in thin materials like vinyls, flexible plastics, paper, folding carton.

This tool is typically used for applications like psaligraphy art, greeting cards, invitation cards, promotional items (wobblers...), folding carton samples...

Fast Tool Adapter

The Fast Tool Adapter makes sure that you can unlock extra production power with your Kongsberg C table. No need for tool changes, just let the table run through the job with two Fast Tools.

The adapter allows for faster throughput with clever tool combinations. There’s less manual tool changing during production and you can improve output quality, especially on soft signage materials like vinyls.

Psaligraphy Knife Tool

The Psaligraphy Knife Tool is specifically developed for fine details in thin materials like paper, folding carton, flexible plastics.

This tool is typically used for applications like greeting cards, invitation cards, promotional items (wobblers...), folding carton samples and psaligraphy art.

Rigid Material Knife Tool

The Rigid Material (RM) Knife Tool is a static knife tool suitable for a wide range of materials at high speed. There is a large selection of knife blades available that makes it possible to cut everything from light weight detailed work to heavy rigid board like plastic foamed PVC 3 mm.

Crease blade

Crease blades are typically used for creasing flexible plastic sheets such as polypropylene.

With this type of material a blunt blade will give better folding capabilities than what can be achieved with a crease wheel. Crease blades fit the Rigid Material knife tool or CorruSpeed tool.

Crease Wheel

(26 mm)

A smaller sized wheel for micro flutes, folding carton and plastic corrugated. The smaller wheels and the heavy crease power have a good effect on defeating the ‘memory’ of the plastic material.